Blaupunkt CR11 Edition, Руководство пользователя

Страница: 7 / 54

E
N
G
L
IS
H
5
1. Place your clock face down on a flat and soft surface.
2. Slide and remove the battery door at the back bottom of your unit.
3. Insert the first AA battery into the right side of the battery compartment and slide
the battery to the left side. Then insert the
second AA battery into the right side again by observe the c / - polarity
inside the battery compartment.
4. Recover the battery door.
Remarks:
Do not mix old and new batteries.
Do not mix alkaline, standard or rechargeable batteries.
Alkaline batteries are recommended for optimal usage of this clock.
Please deposal the battery environment friendly; please reference your location
government requirement for the recycle.
If AC power is interrupted, the batteries are only used to power your unit. The backup battery
will keep the time and all settings of your unit.
Setting time, 12/24hours time and Snooze
1. Press and hold SET / ALM SET , the hour digits flash. Press or to set the
hours. Press and hold or will accelerate setting at high speed.
2. Press
SET / ALM SET once again, the minute digits flash. Press or to set the
minutes. Press and hold or will accelerate setting at high speed.
3. Press
SET / ALM SET once again: 24Hr flash, press or to select 12Hr 24Hr . In
12Hr mode, PM will appear on the display to indicate afternoon time. There is no AM
indicator.
4. Press
SET / ALM SET once again, the year 2015 flash. Press or to set to the current
year.
5. Press
SET / ALM SET once again, the month digits flash. Press or to set to the current
month.
6. Press
SET / ALM SET once again, the date digits flash. Press or to set to the current
date.
7. Press
SET / ALM SET once again, 05 flash. Press or to set the snooze duration (from 5
min to 60 min.).
8. Press
SET / ALM SET again to complete set-up. If no key is pressed in approximate 10
seconds at any time during set-up, the clock will exit the set-up mode. Remark: the
calendar must be set correctly to current date / month / year to enable the weekdays /
weekends alarm work properly.
Setting alarms
1. In standby mode, press SET / ALM SET once, the default alarm time 6:00, ALM 1 and
WEEDAYS will appear.
2. Then press and hold
SET / ALM SET until the hour digits flash. Press or to set the
desired hour. Press and hold or to accelerate setting at high speed. PM will
appear on the display to indicate afternoon time if 12-Hr format is selected. There is no
AM indicator.
3. Press SET / ALM SET once again, the minute digits flash. Press or to set desired
minutes. Press and hold or to accelerate setting at high speed.
4. Press
SET / ALM SET once again, LCD displays “bu” (buzzer)., Press or to select the
wake-up sound sources :-
CR11 EDITION