3
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
SAFETY INSTRUCTIONS
Safety Instructions
When carrying out installation work
and making connections please
observe the following safety
instructions:
-
Electronic vehicle systems may fail
if they are incorrectly installed or ser-
viced.
-
Disconnect the negative terminal of
the battery! When doing so, please
observe the vehicle manufacturer’s
safety instructions.
-
Make sure you do not damage ve-
hicle components when drilling any
holes.
-
Depending on the model, your ve-
hicle may differ from the description
provided here. We accept no respon-
sibility for any damages due to in-
correct installation or connection or
for any consequential damages.
If the information provided here is not
suitable for your specific installation re-
quirements, please contact your
Blaupunkt dealer, your vehicle manu-
facturer or our telephone hotline.
Tips for Safe Operation
- This CD changer is designed only for
operation in negatively grounded,
+12 V DC systems. This device can-
not be used in +24 V or positively
grounded systems.
-
This equipment may not function
properly at extremely high or low
temperatures. This device is
equipped with a built-in automatic
protection circuit. If the temperature
reaches a pre-set value, the auto-
matic protection circuit will shut down
the entire device. If this happens,
open a window and let the car cool
down.
Condensation
On rainy, damp days or just after turning
on the car heater, water vapour may
condense on the laser lens of the CD
changer. If this happens, the equipment
will not function properly. To counteract
this, remove the magazine from the
device and wait for approximately one
hour. During this time, the water vapour
will evaporate, after which the
equipment will function normally again.
Remove the magazine from the CD
changer at temperatures above 60
°
C
if it is not in use, or before long periods
of disuse at any temperature.
