BR460
22.05.19 17:00
AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
37
BR460
22.05.19 17:00
5
5
Volume | DAB mode
announcements (see the chapter "User settings", section "Making
settings in the "VOLUME" menu", menu item "TRAFFIC VOL").
To cancel a switched-through traffic announcement, press the
SRC
button.
Volume
Traffic information
Adjusting the volume
You can adjust the volume in steps fron 0 (off) to 50 (maximum).
In the reception area "EUROPE", an FM station can identify traffic reports by
means of an RDS signal. If priority for traffice reports is swiched on, a traffic
report is automatically switched through, even if the car sound system is
currently not in radio mode.
If priority is switched on, the display shows the traffic jam symbol ( ).
"TRAFFIC" is displayed during a switched-through traffic announcement.
The priority is activated and deactivated in the user menu (see the chapter
"User settings", section "Making settings in the "TUNER" menu", menu item
"TRAFFICINFO").
Turn the VOL control to change the Volume.
Note:
If a telephone is connected with the car sound system as described in
the installation instructions, the car sound system is muted in case
of a phone call. During muting, the display shows "TELEPHONE".
Note:
The volume is increased for the duration of the switched-through
traffic announcement. You can adjust the minimum volume for traffic
Muting the car sound system (Mute)
Briefly press the On/Off button to mute the car sound system or to
reactivate the previous volume. While it is muted, the display shows
"MUTE".
DAB mode
With DAB, you can enjoy radio in digital sound quality. In contrast
with standard radio broadcasting, several programmes (services) are
always broadcast over the same frequency for DAB. These services are
combined into a so-called ensemble. In some cases, the same service
can be received in different ensembles.
Note:
You will need a special DAB antenna to be able to receive DAB
signals. This can be a separate DAB roof/ window antenna or a DAB/
AM/FM combination antenna.
Changing to DAB mode or selecting a DAB memory bank
Press the
DAB+
button repeatedly until the desired DAB memory bank
is displayed: DAB1 >DAB2 >DAB3. If D AB mode is switched on, the
display showsthe symbol
Notes:
•
Up to 5 services can be stored in each DAB memory bank.
•
DAB memory banks can be activated or deactivated via the user menu
(see the chapter "User settings", section "Making settings in the
"DAB TUNER" menu, "PRESETS" menu item). Deactivated DAB
memory banks are skipped during the source selection with the
SRC
button .
Tuning into ensembles/services
With DAB, several services broadcast over the same frequency are
always combined into an "ensemble".
Switching on/off via vehicle ignition
The car sound system will switch off/on simultaneously with the ignition
if the device is correctly connected to the vehicle's ignition as shown in the in-
stallation instructions and you did not switch the device off by pressing the
On/Off button.
BR460
22.05.19 17:00
6
6
DAB mode
List selection
Press the button < to display the list of all received ensembles.
The display shows the current ensemble.
Press the button < to returns you to the list of ensembles.
Press the button > to display the services of the selected ensemble.
The first service of the ensemble is shown on the display.
Press the button > to play back the service.
The selected service is being played. You are exiting the list selection.
Select the desired DAB memory bank.
If necessary, set the desired service.
Press the
MENU
button for approx.2 seconds to start scanning.
During the scanning, "SCAN" and the current service name are inter-
mittently shown on the display.
Briefly press the
MENU
button to continue listening to the service
that is currently being scanned.
Press the station button
1-5
for approx. 2 seconds to store the current
service under the button
-or-
Briefly press the station 1-5 to call up the stored service.
Press the button
△/▽
or hold the button to select a different
ensemble.
Press the button
△/▽
once or several times or hold the button
pressed to select a different service.
Note:
Saving a service or calling up a saved service
Scanning services
Refreshing services received
Selecting an ensemble
You can directly select ensembles that you have received once already
(for this to work, the ensemble must be receivable).
Briefly press the
△/▽
button to change to the previous/next en-
semble. The first available service in the ensemble is played.
Note:
With activated PTY function, long press the
△/▽
button to seach
the PTY programme type.
Ensemble seek tuning
You can find new ensembles using seek tuning.
In DAB mode, seek starts with long press button / .
For this briefly press </ > keys.
Long press
DAB+
butto enter to List selection.
Selecting a service
After you have tuned into an ensemble, you can select a service from
the ensemble.
Services or ensembles, which have previously been received, can be
selected directly in lists without interrupting the ongoing playback (for
this purpose, the services/ensembles must be receivable).
You can use the scan function to play all the receiveable services briefly.
To update the received service, read the section "Making settings in the "DAB
TUNER" menu", menu item "SERVICE SCAN" in the chapter "User settings".
ENGLISH
ENGLISH
