37
Demo mode
Guide for operating the system when installed in a shop display panel:
If the RGN 08 is to be operated in demo mode while installed in a
demo wall (e.g. in a shop display), a minimum calibration must be
carried out. Open the auxiliary menu by pressing the AUX key and
then press the 9, 5, 7 function keys one after another. After ap-
prox. 8 seconds, the service menu will appear. Press the
rocker switch until the selection arrow
v
points to
Navigation
and then switch back to the auxiliary menu by pressing the S key
twice.
To run the demo mode, proceed as follows:
1. Select
DEMO
from the DSC menu. The demo mode menu will then
appear.
If
ON
is selected, the route will be travelled along only once and will
then stop. A new destination must then be entered and route guid-
ance must be restarted.
If
CONTINUOUS
is selected, the demo will run in a continuous loop,
i.e. it will continue to repeat the route from the starting point to the
destination.
2. After selecting one of these menu items, the system will be restarted.
3. After the system has restarted, select
POSITION
from the DSC
menu and, as described in the Chapter entitled “Example for entering
a destination”, select a town, a street and the appropriate crossing.
After entering the address, press the
SET POSITION
function
key.
S
AUXILIARY MENU
NAVI
EXIT
5
7
9
S
DEMO MODE
ON
CONTINUOUS
OFF
EXIT
