5
Please ensure there is a 13cm (5.1") clearance between the glass and obstacles in the room like curtains or furniture.
The robot can clean horizontally mounted glass but only when using the Direction Control Buttons on the Remote
Control.
The robot can clean glass mounted at an angle but may not operate normally; in such a case, a person should be
in the vicinity to assist should there be a problem.
Do not use the robot upside down.
Please refer to the manufacturer's care and cleaning instructions before using robot on glass with an uneven
surface, such as frosted, textured, patterned, or coated glass. Blaupunkt Robotics cannot be responsible for
damage due to improper use on these surfaces.
3.2 Attach the Cleaning Pad
3.3 Assemble the Power Adapter
3.4 Install the Safety Tether
A: Power Cord
B: Power Adapter Power Cord C: Safety Pod
D: Safety Tether
Turn the robot over and attach the Cleaning Pad to the bottom of
the robot smoothly. The white side of the Cleaning Pad attaches to
the Velcro and the gray microfiber side faces out. Make sure the
Cleaning Pad does not cover the Edge Detection Sensors, front
bumper sensor and rear bumper sensors.
A
B
C
D
3. Operating XWIN
