10
Before performing cleaning and maintenance on robot, Power OFF and unplug robot from the glasses.
4.1 Cleaning Pad
Turn Robot over and remove the Cleaning Pad. Soak the Cleaning Pad in 20
℃
, clean water for 2 minutes. Hand wash
with mild detergent and lay flat to dry. Allow it to dry completely before re-attaching it to robot.
CAUTION :
Do NOT use a wet Cleaning Pad on robot or it may slip on the window. Washing the Cleaning Pad regularly can
extend its service life. If the Cleaning Pad becomes worn or no longer fits properly within the Velcro area, replace it
with a new one to achieve best cleaning performance.
4.2 Unit Bottom Maintenance
4. Maintenance
Fan
Turn robot over and wipe any debris from
the Fan with a dry cloth to maintain suction
power well.
Side Rollers
Turn robot over and wipe the four Side
Rollers with dry cloth to maintain their
best effect.
Edge Detection Sensors
Turn robot over and wipe the five Edge
Detection Sensors clean with a dry cloth to
maintain their effect.
Squeegees
Turn robot over and wipe the squeegees
with a dry cloth to maintain their effect.
