(Fig. 8)
(Fig. 9)
(Fig. 7)
(Fig. 6)
Machine Specific Safety Instructions
Know your reciprocating saw. Do not plug the charger into the power source or install the battery in the tool until you have read
and understand this Instruction Manual. Learn the tool’s applications and limitations, as well as the specific potential hazards
related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
•
This machine requires the use of two hands to ensure safe operation and should not be used when working from ladders and
step ladders. If the machine is to be used when working at height a suitable, stable platform or scaffold tower with hand rails
and kick boards should be used.
•
Hold the power tool by the insulated gripping surfaces when performing an operation where the cutting tool may contact
hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the
operator.
•
Ensure that power tools are disconnected from the battery supply when not in use, before servicing, lubricating or making
adjustments and when changing accessories such as blades.
•
Do not stop the blade by forcing the machine or by using sideways pressure.
•
Do not use blades that are bent or have missing teeth. This is highly dangerous and could result in a serious accident causing
injury to the operator and bystanders and damage to the machine. Only use blades that are recommended by the supplier
and that are in good condition.
•
Do not use blades that are larger than specified. Only use blades that are rated for the machine.
•
Always keep the blade securing mechanism clean and free from dust build-up
•
Do not start the machine with the blade in contact with the workpiece.
•
Check the workpiece for any protruding nails, screw heads or anything that could damage the blade.
•
Ensure that there are no obstructions underneath the workpiece, it is easy to cut into sawhorses and bench tops. Hold the
machine correctly and adopt a stable stance.
•
Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the workpiece by hand
or against your body leaves it unstable and may lead to loss of control.
•
Do not attempt to modify the machine or its accessories in any way.
•
Do not force the machine. This will reduce the wear on the machine and blade, increasing its efficiency and operating life.
Содержание BP5218
Страница 59: ... Fig 4 Fig 5 Fig 3 Fig 2 Fig 7 Fig 6 Fig 8 Fig 9 ...
Страница 64: ...www blaupunkt com ...
