Boston RCC 45
18
Re-start following an interrupti-
on of the power supply
(coding system is activated)
•
Turn on the radio.
The display shows “CODE”.
•
Now enter the code number of the
Blaupunkt car radio passport and con-
firm: See example under “Switching on
anti-theft coding”.
The unit is ready for use.
If the display shows “CODE ERR”, you have
entered a wrong code. Re-enter the correct
code after the waiting time (“CODE” will ap-
pear in the display).
If you switch off the set while it is blocked, the
waiting time will start anew as soon as the
radio is turned on again.
Entry of a wrong code number
It should not be possible for a thief to find out
the correct code number by trial and error.
This is why the set will be blocked for a certain
period of time if a wrong code number has
been entered. The display will then show
“CODE ERR”.
After the first three unsuccessful attempts,
the system will lock for 8 seconds; after
further attempts, the waiting time extends to
one hour.
- Press preset button 2 five times; the
display shows “2500”.
- Press preset button 3 twice; the dis-
play shows “2520”.
- Press preset button 4 once; the dis-
play shows “2521”.
•
To confirm the code number:
Press the rocker button
.
Now the security coding system is active.
After having turned on the set, the display will
briefly show a “C” before “REG ON” or
“REG OFF”.
Switching off anti-theft coding
•
Turn off the radio.
•
Press preset buttons 1 and 4 simulta-
neously, hold down and
•
turn the set on again.
The display shows “CODE”.
•
Now enter the code number to be found
in the car radio passport and confirm
(see example under “Switching on anti-
theft coding”.
Security coding is now switched off.
When switching on the unit, the “C” before
“REG” will not be displayed.
Anti-theft coding
This car radio is supplied with inactive code
protection. In order to switch the anti-theft
coding system on, proceed as described in
the following.
If the coding system is active while the power
supply to the system is interrupted (e.g. theft,
disconnection of the car battery), the set will
be electronically blocked. In such a case it
can only be made operable again by entering
the correct code number given in the car
radio passport.
Switching on anti-theft coding
Precondition:
The set must be connected to permanent
12 V supply.
To activate the coding system:
•
Turn off the radio.
•
Press preset buttons 1 and 4 simulta-
neously, hold down and
•
turn the set on again.
The display shows “CODE”.
•
Briefly press preset button 1; the dis-
play shows “0000”.
•
Enter the code number given in the car
radio passport:
Example: The code number is 2521.
- Press preset button 1 twice; the dis-
play shows “2000”.
