8
OPERATION
TA interruption function
The current traffic announcement is
cancelled by turn the TA function to STOP
(in TA item of RDS menu, when
the TA station is not received it only has
on/off. But when received a TA station
the TA item will have on/stop/off for
your
selection). But the TA mode will not be
off.
unwanted EON TA switching, which
EON TA information was received from
current station and the radio switched to
that EON linked station, but no
Information could not be received
because the EON linked station is
located too far from that area. So the
radio is switched back to current station
again. In above operation, a customer
listens to a wrong program or mute
sound for a while. The RDS data used
are the PI, PS, AF, TP, TA, EON and PTY
data.
PS: Program Service Name
Broadcast station name data expressed
in alphanumerically characters
AF: Alternative Frequencies
Frequency list of broadcasting stations
transmitting the same program
TP: Traffic Program Identification
Identification
data
for
traffic
information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or not.
EON: Enhanced Other Networks
Information
Broadcasting information on PI, AF, TP,
TA, etc, relating to networks other than
the network used for current reception.
USB PLAY OPERATION
In the front panel of the unit, there is an
USB interface (10). You can connect an USB
driver through this interface (10).
When you connect an USB driver through
the interface, the unit will search the MP3/
WMA files in the USB driver and start to play.
If a USB drive is already inserted in the
driver. Keep pressing SRC button (4)
shortly until the USB mode display appears.
SELECTING FILES
Press
button (8) or
button (12) to
move to the previous file or the following
file. File number shows on display.
Hold
button (12) or
button (8) to
fast forward or fast reverse. Playing starts
from when you release the button.
PAUSING PLAYING
Press
button (19) to pause playing.
Press it again to resume play.
SCAN PLAY ALL FILES
Press SCN button (18) to play first several
seconds of each file. Press again to stop
intro and resume play.
REPEAT FUNCTION
There are 3 repeat ways:
RPT all---RPT folder---RPT one
Press RPT button (17) to one of them.
RPT all: Repeat all files.
RPT folder: Repeat all files of the folder.
RPT one: Repeat one song
PLAYING ALL FILES IN RANDOM
Press RDM button (16) to play all files in
random order. Press it again to cancel the
random function.
SELECTING DIRECTORY UP/DOWN
Press DIR- button (15) or DIR+ button
(14)
to select directory downward or upward. If
the MP3 disc does not contain any directory,
