- 8 -
Installation tolerances for the wheel sensors Fig. 5
Clearance Z:
Z = 6.5 mm
±
1.5 mm
Offset Y:
The centre of the sensor must be located over the
entire circumference of the wheel over the magnetic
strip.
Set angle:
The edges of the wheel sensor must be set at a
distance conforming to Z.
Turning angle:
The turning angle must not exceed 10
°
.
Length of the
metal holder:
The free-standing length must be kept as short as
possible (max. 90 mm).
If the free-standing length is greater than 90 mm,
then the metal holder must be reinforced.
Rotation angle T:
The rotation angle must not exceed 20
°
.
Special case: T = 90
°
, do not mount the metal
holder facing in the direction of the magnetic strip.
Y
Y
Z
≥
5 mm
Z
≤
8 mm
Z
≤
10˚
Special case
T
90˚
metal holder will affect
the magnetic field
≤
90 mm
centre of the
sensor
Содержание Berlin RCM 303 A
Страница 5: ...5 Componentry Fig 1 Loudspeaker Mounting material...
Страница 9: ...9 Fig 7 Fig 6 max 7 mm Fig 8 Fig 10 Fig 9 loop loop...
Страница 10: ...10 Connection without a TV Video interface Fig 11 Connection with a TV Video interface Fig 12...
Страница 11: ...11 CORA bus connection Fig 13 Sensor connection Fig 14...