Blaupunkt ATF501, Инструкция по эксплуатации

Страница: 7 / 80

1. Front fan grille
2. Fan blade nut
3. Fan blade
4. Back grille fixing nut
6. Motor shaft stem
5. Back grille
7. Motor housing
8. Oscillation lock
9. Grille fixing screw
10. Control panel with buttons
11. Base
d) Put on the fan blade (3) paying attention to the notch in the stem (6) and the fan blade opening.
g) Install the fan's front grille (1) by fitting the edge into the hooks on the back grille. Then secure by
tightening the grille's fixing screw (9).
2. Assembly:
a) Place the motor body (7) in the base (11).
3. Disassembly:
a) Perform the disassembly in the reverse order of the assembly procedure.
FAN OPERATION
c) Screw on the back grille fixing nut (4).
b) Put the back grille (5) on the motor base (pay attention to the notches).
APPLIANCE ASSEMBLY AND DISASSEMBLY
1. Make sure the appliance is disconnected from the power source.
f ) Tighten the fan blade fixing nut (2)
3. To turn off the fan, press the 0 button on the control panel.
CLEANING AND MAINTENANCE
Before cleaning and maintenance, make sure that the fan has been disconnected from the power
source.
The fan should be cleaned regularly. Body, posture should be wiped with a dry cloth. The interior
should be blown out with compressed air or vacuumed with a vacuum cleaner.
1 - low speed
5. Vertical tilt adjustment. To change the fan tilt, hold the appliance in position and tilt the motor body.
2. To start the fan, press one of the buttons on the control panel:
2 - medium speed
1. Before connecting the fan to the power supply, make sure that the button on the control panel is set
to 0. Connect the appliance to the power supply.
3 - high speed
4. Oscillation. To enable the fan's oscillation movement, press the oscillation lock. To disable the fan's
oscillation movement, lift the oscillation lock.
5
ATF501