Blaupunkt Arrifana 08C, Инструкция по эксплуатации

Страница: 16 / 119

www.blaupunkt.com
Arrifana 08C
16
HEAT MODE*

Press the " " button a number of times until the " " symbol appears.

Select the target temperature (13-27°C) by pressing the " " or " " button until the
corresponding value is displayed.

In heating mode, the fan speed is selected automatically by the appliance.

Water is removed from the air and collected in the tank.

When the tank is full, the appliance shuts down and " " (full tank) appears on the display.
The tank cap must be extracted and emptied (Reference "Intermittent drainage section").
Run off all water left into a basin. When all the water has been drained, put the cap back in
place.

When the tank has been emptied, the appliance starts up again.
N.B. 
When operating in very cold rooms, the appliance defrost automatically,
momentarily interrupting normal operation. "
" appears on the display. During
this operation, it is normal for the noise made by the appliance to change.

In this mode, you may have to wait for a few minutes before the appliance starts
giving out hot air.

In this mode, the fan may operate for short periods, even though the set
temperature has already been reached.
"*" means only the heat pump model have this function.