38
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
➮
Press the or button
8
.
The radio tunes into the next receiva-
ble station.
Tuning into stations manually
You can also tune into stations manual-
ly.
Note:
●
You can only tune into stations
manually if the RDS function is de-
activated.
➮
Press the or button
8
.
Browsing through broadcasting
networks (only FM)
If radio stations provide several pro-
grammes, you have the option of brows-
ing through their “broadcasting net-
works”.
Note:
●
The RDS function must be activat-
ed before you can use this feature.
➮
Press the or button
8
to
switch to the next station on the
broadcasting network.
Note:
●
When using this feature, you will
only be able to switch to stations
that you have received once before
already. To receive the stations,
use the scan function or the Travel-
store function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
➮
Press the MENU button
7
.
➮
Press the or button
8
repeat-
edly until “SENS” and the currently
set value appear in the display.
“SENS HI6” means that the tuner is set
to the highest sensitivity setting. “SENS
LO1” means it is set to the lowest sen-
sitivity setting.
➮
Set the desired sensitivity using the
buttons
8
.
When you have finished adjusting the
setting,
➮
press the MENU button
7
.
Note:
●
You can set different sensitivity
levels for FM and MW or LW (AM).
Storing stations
Storing stations manually
➮
Select the memory bank that you
want (FM1, FM2, FMT) or one of
the wavebands (MW or LW).
➮
Tune into the station that you want.
➮
Press and hold down one of the
station buttons 1 - 6
;
for longer
than two seconds to assign the sta-
tion to that button.
RADIO MODE
02Calg/SanDiegoMP35_gb•
09.02.2005, 13:50 Uhr
38
