24
MAINTENANCE AND CLEANING OF THE HOB
Switch-off the appliance before cleaning.
Do not clean the hob if the glass is too hot because they are
risk of burn.
•
Remove light marks with a damp cloth with washing up liquid diluted in a little water. Thenrinse
with cold water and dry the surface thoroughly.
•
Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratchesmust
be absolutely avoided.
•
Do not ever use any steam-cleaner or pressure washer
•
Do not use any object that may scratch the ceramic glass.
•
Ensure that the pan is dry and clean. Ensure that there are no grains of dust on yourceramic
hob or on the pan. Sliding rough saucepans will scratch the surface.
•
Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent
thesurface being damaged.
Regular cleaning of the hood guarantees correct and error-free operation and extends the life of the
hood.
FILTER CLEANING INDICATOR
When the hood is on and the suction power is set to [0], the time remaining before cleaning
the filter is displayed on the timer display. The default setting is 30 hours, but you can change
this setting if you want.
Grease filter cleaning indicator:
When the grease filters are to be cleaned, the timer display shows [00h] and a dot flashes on
the hood selection key.
Show the remaining time:
Action
Control panel
Display
Activate the hood
press on the hood selection key
[remaining time] on the
timer display
Reset the time remaining before cleaning the hood filter
Action
Control panel
Display
Activate the hob
Press key [ ] for 2 sec.
[ 0 ] and a dot flashes on the
hood selection key
Select the hood
press on the hood selection key
[ 0 ] and [ 00h ] on the timer
display
Reset the counter
press on the timer key for 3
secondes
The last user-specified setting is
activated
Confirm the setting
press on the timer key again
–
