Blaupunkt 5II94290, Инструкции по монтажу и использованию

Страница: 18 / 20

FUNZIONAMENTO I CLEANING AND MAINTENANCE GB
17
HOB ERROR TABLE
These errors appear on the hob display.
Error code Description Possible causes Solution
C, E, C flashing, E flashing
or symbol -
If the display of a cook-
ing zone shows one of
these symbols, you have
intervened or you are
intervening in the basic
system configurations.
Problems or changes to
the basic system config-
urations detected.
Contact technical sup-
port specifying the error
code.
E2 Excessive temperature of
the cooking zone.
Pot overheating. Cool the system down
by reducing power or re-
moving the pot.*
E3 Malfunction due to the
use of pots made of an
unsuitable material.
Pots of made of unsuita-
ble material or possible
loss of their magnetic
properties as the tem-
perature rises.
Use pots of made of a
suitable material or re-
place them.*
E4, E5, E6, E7, E8, E9, EA,
EC, EH,
Hardware fault Hardware errors detect-
ed
Contact technical sup-
port specifying the error
code.
No display / Function Voltage or touch control
error.
Faulty electrical con-
nection or component
failure.
Contact technical sup-
port specifying the error
code.
u Pot not detected Pot not suitable Use a suitable pot.Refer
to the paragraph suita-
ble pots. *
Er31, Er47, Er22, Er20,
Er36, Er40, U400
or display segments that
light up in sequence
Touch control fault Error detected in the
touch control
Contact technical sup-
port specifying the error
code.
Er 03 o
Continuous activation of
one of the buttons, the
control switches off after
10 seconds.
Liquid or pot on the con-
trol area
Dry and clean the glass
or remove the pot from
the control area.
The power returns to
level 0
Fault detected in a hard-
ware component
Contact technical sup-
port specifying the error
code.
L No error!
Child-Lock activated
Deactivate the Child-
Lock by referring to the
appropriate paragraph.