Blaupunkt 5CE3 Series, Инструкция по эксплуатации

Страница: 30 / 65

en
30
Fault Possible cause Remedial action
Appliance is not cooling,
temperature display and light
are lit.
Showroom mode is switched
on.
Press and hold down the alarm button,
Fig.
"
/5, for 10 seconds.
After a short time, check whether your
appliance is cooling.
The “cool-fresh”
compartment is too warm or
too cold.
The standard setting has
been set too high or too low
(e.g. if there is frost
in the “cool-fresh”
compartment).
The temperature in the “cool-fresh”
compartment can be set to be 3 steps warmer
and/or colder, Fig.
"
. If the refrigerator
compartment temperature is set to 0,
the “cool-fresh” compartment has
a temperature of almost 0 °C.
1. Hold down “super” button 2 for 3 seconds
until temperature display 4 flashes.
2. Change the setting using the temperature
setting button 3.
Setting -3 corresponds to the coldest
setting
S3 corresponds to the warmest
setting
The selected setting is saved after one
minute.