8
Attaching the stand
To complete the stand installation you will need a Phillips screw driver.
Place the TV set on a fl at and clean surface with the panel facing downwards to avoid damage.
(fi g.1)
Attach the stand neck (b) to the rear of the TV
set (a)
(fi g.2)
Secure the neck to the TV by using the (c) 4 x
M4x10 (M4x8) screws provided
(fi g.3)
Insert the TV into the stand at 45 degrees (d). Twist the TV into the CLOSE position until it clicks into place (e).
a
b
c, 4 x M4x10 (M4x8)
45°
45°
90°
PUSH
Open
C lose
d
e
User Guide - 236-173J-GB-4B-HCDU-UK.indd 8
User Guide - 236-173J-GB-4B-HCDU-UK.indd 8
5/2/2013 5:30:19 PM
5/2/2013 5:30:19 PM
