10
www.blaubergventilatoren.de
Komfort ERV EC DB S14
Washer
Nut
Threaded rod
Vibration
absorbing rubber
min 20 mm
CONTROL PANEL MOUNTING
MAKE SURE THAT THE CONTROL PANEL IS NOT DAMAGED. DO NOT USE A DAMAGED CONTROL
PANEL! DO NOT INSTALL THE CONTROL PANEL ON AN UNEVEN SURFACE! WHILE TIGHTENING
THE SCREWS, DO NOT APPLY EXCESSIVE FORCE TO PREVENT THE CONTROL PANEL CASING
DEFORMATION.
Wall flush mounting of the control panel:
1. Prepare a wall recess and route
the required wires and cables to
the control panel installation place.
Install the mounting box for wall
flush mounting. The mounting box is
included in the delivery set.
2. Use a screwdriver to
carefully undo the latches
on the backside of the
control panel and remove
the back cover.
3. Screw the back side of the casing to
the mounting box through the mounting
holes. The screws for connection of
the control panel to the mounting box
are included on the delivery set. Then
connect the cable to the control panel
in accordance with the external wiring
diagram.
4. Press the latches to fix the
control panel display.
Wall surface mounting of the control panel:
