blaubergventilatoren.de
CiViC eC dB 1000
10
WARNING!
Before installation operations route necessary cables and wires to the unit mounting place.
WARNING!
If the overall dimensions of the assembled unit do not allow moving it to the installation site, it is permissible to temporarily
disconnect the unit blocks, and then assemble them in the reverse order.
Fasteners for fan mounting are not included in the delivery set and should be ordered separately. While choosing fasteners consider the
material of the mounting surface as well as the weigh of the unit, refer to the Technical data section. Fasteners for unit mounting should
be selected by the service technician.
The unit may be suspended on threaded rods or may be rigidly fixed to a horizontal surface by anchor bolts. The unit is suspended using
the supplied mounting bracket and L-brackets.
To get the best performance of the unit and to minimize turbulence-induced air pressure losses, connect the straight air duct section to
both unit spigots. Minimum straight air duct length: equal to 1 air duct diameter on intake side equal to 3 air duct diameters on outlet
side.
To protect the internal parts of the unit from ingress of foreign objects, it is necessary to install a grille or other protective device with
mesh width not more than 12.5 mm to prevent free access to the fans. The air ducts, protective grilles and devices are not included in the
delivery set and are available upon separate order.
MOUNTING AND SET-UP
WHILE INSTALLING THE UNIT ENSURE CONVENIENT ACCESS FOR SUBSEQUENT
MAINTENANCE AND REPAIR.
THE UNIT MUST BE MOUNTED ON A PLANE SURFACE.
MOUNTING OF THE UNIT TO AN UNEVEN SURFACE CAN LEAD TO THE UNIT CASING
DISTORTION AND OPERATION DISTURBANCE.
BEFORE MOUNTING MAKE SURE THE CASING DOES NOT CONTAIN ANY FOREIGN
OBJECTS (E.G. FOIL, PAPER).
