BLAUBERG BLABQUATRO, Руководство пользователя

Страница: 6 / 16

6
EN
DELIVERY SET
Fan - 1 pc.
Screws with dowels - 4 pcs.
User’s manual
- 1 pc.
Packing box - 1 pc.
BRIEF DESCRIPTION
The unit described herein is an axial fan for exhaust ventilation of small to medium-sized premises heated during winter. It
is designed for wall or ceiling mounting (Fig. 3-4). The fan is designed for connection to ø 100, 125 and 150 mm air ducts.
OPERATION GUIDELINES
The fan is rated for connection to single-phase AC 220-240 V/50 Hz power mains.
Air motion direction in the system must match the pointer on the fan casing.
Hazardous parts access and water ingress protection rating is IP22.
The fan is rated for operation at the ambient temperature ranging from +1 °C up to +45 °C.
The unit is rated as a Class II electrical appliance.
INSTALLATION AND SET-UP
The fan is designed for wall or ceiling mounting with direct air exhaust to the ventilation shaft or into the round air duct of
matching diameter (Fig. 2).
Fan installation sequence:
step 1.
Cut off power supply and make sure electricity has been turned off (Fig. 5).
step 2.
Run the power cable to the vent hole (Fig. 6).
step 3.
Remove the front panel from the fan. Then remove the circuit board cover (Fig. 7).
step 4.
Mark and drill holes for mounting the fan and then install the fan (Fig. 8-10).
step 5.
Connect the fan to power mains according to the wiring diagram (Fig. 13).
step 6.
Cover the casing with a front panel and a decorative panel (Fig. 11).
step 7.
Supply power voltage to the fan (Fig. 12).
TERMINAL DESIGNATIONS ON WIRING DIAGRAMS
L
— phase (220-240 V only)
S
— external switch
N
— neutral (220-240 V only)
QF
— automatic circuit breaker