BLAUBERG Auto Revers 150, Руководство по эксплуатации

Страница: 2 / 16

2
WARNING
! Follow the user's manual requirements to ensure
durable and trouble-free operation of the unit
Disconnect the unit from power supply prior to any connection,
servicing and repair operations.
Only qualified electricians with a work permit for electrical units up
to 1000 V are allowed for installation and maintenance.
The present user’s manual should be carefully read before
beginning works.
Single-phase power mains must comply with the acting local electrical
norms and standards.
Fixed electrical wiring must be equipped with an automatic
circuit breaker.
The unit must be connected to power mains through a QF automatic
circuit breaker integrated into the fixed wiring system. The gap between
the circuit breaker contacts on all poles must be not less than 3 mm.
Check the unit for any visible damage of the impeller and the casing
before starting installation. The casing internals must be free of any
foreign objects that can damage the impeller blades.
The unit design is constantly being improved, thus some models may be slightly different
from those described in this manual.