BLAUBERG Ventilatoren KOMFORT EC DE Series, Руководство по эксплуатации

Страница: 18 / 28

18
www.blaubergventilatoren.de
KOMFORT EC DE
Table 6. Operation and parameter setup of the unit (continued)
Function Indication
9 Language selection

For language selection in the control panel menu choose the
LANGUAGE option in the Engineering menu and press ENTER .

Select a required language in the list.

Press ENTER .
 To return to
Engineering menu
without saving changes press
EXIT
.
10 Extra options

Select the EXTRA OPTIONS item in the Engineering menu and press
ENTER .

The SUPPLY FAN OFF MODE is used for the heat exchanger freezing
protection and is activated only if the heating function is disabled.

To activate the heat exchanger freezing protection function by means
of the supply fan deactivation select the
OFF
option in the
HEATING
CONTROL entry. The function setup is accessible by selecting the ON option
in the SUPPLY FAN OFF MODE .
 To select a humidity sensor type in the
Engineering menu
list set 1
for the duct sensor or 2 for the room sensor in the menu item HUMIDITY
SENSOR SELECTION
.

To select the bypass operation mode set 1 for the standard operation
mode to prevent the heat exchanger freezing. Set 2 to enable bypass
opening in the ventilation mode in the
BYPASS OPERATION MODE
.
 To get to
Engineering menu
and save changes press
EXIT
.
 Setting
ON
in the entry
SUPPLY FAN OFF MODE
will change the
programme to deactivation mode of the supply fan.
 Press a corresponding field to select one of the items as
WORKING HOURS
,
DOWNTIME , SWITCH-OFF TEMPERATURE (the temperature is set according
to the outdoor temperature sensor readings defined in the range from 0 °C to
-30 °C).
 Use the buttons or to set a required value.

Press ENTER to confirm the set parameters .

To return to Engineering menu without saving changes press EXIT .
11 Password reset

Select PASSWORD CHANGE item in the Engineering menu and press
ENTER
.

Then enter the new password to access to Engineering menu .
 Press
OK
.

To edit the password press RESET . The field ENTER NEW
PASSWORD
will be cleared.

To return to Engineering menu press EXIT .
KOMFORT_EC_DE v1(1)_EN.indd 18 07.08.2015 12:40:12