background image

www.blaubergventilatoren.de

KoMFort ec dBe 2000/3000

9

While mounting the unit provide enough space for its servicing and maintenance. 

Minimum distance required to access 
the unit

Control unit 

Type

KOMFORT EC DBE 2000  

KOMFORT EC DBE 3000  

min A, mm

500

850

UNIT MOUNTING 

The unit is designed for suspended mounting by means of the threaded rod fixed in the threaded dowel.

Example

Nut

Washer

Vibration- 

absorbing  

rubber

Nut  

and lock-nut

To attain the best performance of the unit and to minimise turbulence-induced air pressure losses, while mounting connect a straight air 
duct section on both sides of the unit. 
Minimum straight air duct length: 
•  equal to 1 air duct diameter on intake side.
•  equal to 3 air duct diameters on outlet side. 
If the air ducts are not connected or the connected air ducts are too short, protect the unit parts from ingress of foreign objects by covering 
the spigots with a protecting grille or other protecting device with mesh width not more than 12.5 mm to prevent uncontrollable access 
to the fans. 

MOUNTING AND SET-UP

READ THE USER'S MANUAL BEFORE INSTALLING THE UNIT.

Содержание KOMFORT EC DBE 2000





















Отзывы: