background image

TECHNICAL DATA

UNIT OVERALL DIMENSIONS, mm

A2

A

B

B1

A1

B2

A3

Модель

A

A1

A2

A3

B

B1

B2

BL02 RH 1500
BL02 RH 2500

960

1110

1060

350

1300

960

600

BL03 RH 3500

1290

1440

1390

401

1300

1260

701

BL07 RH 5000
BL07 RH 6000

1420

1570

1519

503

2080

1415

1000

The full technical data list is stated in the supplied technical data sheet.

The unit is designed for indoor or sheltered use. The installation conditions must prevent ingress of atmospheric precipitations and direct 
solar radiation at the ambient temperatures from -35 °C up to +50 °C. The frost protection for the water drainage and connected pipelines 
must be provided during sub-zero ambient temperatures  (if the unit is equipped with an air cooler). The heat medium temperature in 
the water heat exchangers (if available) must be sufficient to prevent its freezing. Hazardous parts access and water ingress protection 
rating:
•  IP54 for the unit motors
•  IP42 for the assembled unit connected to the air ducts without extra cover or weather hoods 
•  IP44 for the assembled unit with connected air ducts, extra cover and weather hoods (specially ordered accessories) 
•  IP00 for the unit not connected to the air ducts
The unit design is constantly being improved, thus some models may be slightly different from those described in this manual.

www.blaubergventilatoren.de

BlauAir rh

5

Содержание BL02 RH 1500













Отзывы: