manualshive.com logo in svg

BLAUBERG Ventilatoren 4058448053467, Руководство пользователя

Поделиться
Скачать
BLAUBERG Ventilatoren 4058448053467 Скачать руководство пользователя страница 25

www.blaubergventilatoren.de

vento expert (Duo) a50/85/100 (Pro3) W v.2

25

Maintenance of the ventilator means regular cleaning of the ventilator surfaces of dust and cleaning and replacement of the filters. To 
enable access to the main serviced units turn off the ventilator using the remote control or the buttons on the indoor unit, then turn off 
power supply completely.

Vento Expert

1. Press the side tabs on the indoor unit to take off the front part.

At the re-assembly of the front panel make sure that the thermal rod is in the low position. If it is uplifted, wait until it goes 

down (up to 2 minutes).

Warning! 

For the

Vento Expert A50/85/100-1 W V.2

models prior to mounting the front 

panel make sure that the thermal rod 

is in the low position and the indica-

tor of the circuit board doesn't blink.

Vento Expert Duo

1. Press the side tabs on the indoor unit to take off the front part. Then open the tabs and disconnect the front panel from the indoor unit. 
Remove the filters for cleaning. Assemble all the parts in the reverse order.

2. Remove the socket connector from the control board. Do not remove the socket connector by pulling the wires. Use a flat screwdriver 
to uplift it, if required.

Vento Expert

Disconnect the socket 

connector from the control 

board

Vento Expert Duo

Disconnect the socket 

connector from the control 

board

DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE 

ANY MAINTENANCE OPERATIONS!

TECHNICAL MAINTENANCE

Содержание 4058448053467

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды