background image

www.blaubergventilatoren.de

vento expert (Duo) a50/85/100 (Pro3) W v.2

24

AIR FLOW BLOCKING FOR Vento Expert

Press the front panel to close the air duct completely. The fan of the ventilator is stopped. 
Meanwhile the unit functionality is not changed.
To open the air duct pull the front panel through the specially designed recessions. The fan automatically starts operating according to 
the actual speed setting.

Air duct blocking

Air duct opening

The light operating indicator is located on the front panel. In the night time the indicator glowing goes down.

AIR FLOW BLOCKING FOR Vento Expert Duo

Press the side tabs to detach the front part of the indoor unit from its back part and close the air duct.
Then open the latches and remove the front part of the front panel. Remove the air flow separator by pulling one of the side clamps. 
Install the front part of the front panel and press it gently to close the air duct. 
The fan of the ventilator is stopped. Meanwhile the unit functionality is not changed.
Open the air duct in the reverse order. The fan starts operating according to the actual speed setting set with the current mode.

The light operation indicator is located on the front panel. In the night time the indicator glowing goes down.

Содержание 4058448053467

































Отзывы: