15
14
Notes:
Please attach manufacturer’s label here.
Manufacturer’s Label:
Important Reminders
It is important that the carer is aware of and considers the following:
•
The Moulded Seat Insert is a custom-made device to be used only by the person it was
made for.
•
If the user has marking on the skin or becomes uncomfortable when in the seat, contact
the Wheelchair Service immediately.
•
The MSI must only be used with the wheelchair it was made for. If a different wheelchair is
going to be used contact the Wheelchair Service for help and advice.
•
Maintenance and adjustments (other than those shown in this User Manual) should only be
carried out by Blatchford Clinical Services.
•
No alterations should be made to the seat nor should other company’s components
be fitted without the prior agreement of Blatchford Clinical Services.
•
The Moulded Seat Insert is not designed for use as a car safety seat.
Due care and attention must be taken at all times when using the Moulded Seat
Take particular care when negotiating slopes, difficult surfaces or other obstacles.
Further Information
Information about wheelchair tie-down and occupant restraint systems can be obtained from:
C N UNWIN LTD., Unwin House, The Horseshoe, Coat Road, Martock, Somerset, TA12
6EY. Tel: 01935 827740 www.unwin-safety.com
If you have further questions about any of the following please contact the Wheelchair Service:
•
availability of seating accessories.
•
changing a Moulded Seat Insert to fit a different wheelchair.
•
use of the seating system in a motor vehicle.
•
information on the crash testing of Moulded Seats.
