4
1. Introduction
Before use, operators must be provided with information, instruction and training for the use of the machine
and the substances for which it is to be used, including the safe method of removal and disposal of the
material collected. All persons who are working with or maintaining this machine must read the manual
carefully and understand it fully. In case you sell the unit, hand it on to the next owner. Keep this manual
always with the machine, to enable it to be referred to at any time. Any other work not covered by this
operating manual must not be carried out.
This machine is designed for industrial use by professionals. Only authorized and trained personnel may
operate this machine. This machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge.
Blastrac BV
offers a course on
the use of the machine in order to make the operating and maintenance personnel familiar with all elements of
the machine. Always use common sense when working with machines.
2. Machine description
The Blastrac dust collector 900 DC may only be used in combination with Blastrac blast cleaning machines,
grinders and / or scarifying machines. The 900 DC can
only
be used for
dry cleaning.
It should
only be
used for removing
noncombustible/non-explosive dust or substances
.
The 900 DC must
not
be used for
pathogenic or carcinogenic or asbestos substances
.
In these cases,
additional safety measures should be used. Always mind the local safety requirements.
Do not use the machine in the presence of dangerous atmospheres.
The machine is designed for usage in conditions according to classification
M
(see below).
Classification according to standard EN 60335-2-69 – Annexe AA
Class
Designation
L
(light hazard) suitable for separating dust with a limit value of
occupational exposure of
greater than 1 mg/m3;
M
(medium hazard) for separating dust with a limit
value of occupational exposure not
less than 0,1 mg/m3
H
(high hazard) for separating all dusts with all limit
values of occupational exposure,
including carcinogenic and pathogenic dusts.
Dust emissions into the environment
Class
Value of performance
L
Retains at least 99 % of Most Penetrating Particle Size (MPPS) 0.3 μm
M
Retains at least 99,9 % of Most Penetrating Particle Size (MPPS) 0.3 μm
H
Retains at least 99,995 % of Most Penetrating Particle Size (MPPS) 0.3 μm
Application
The 900DC is especially designed and built to be used in combination with Blastrac machines.
Contact Blastrac B.V. for the correct execution and combinations.
