Blastrac BS 180, Инструкция по эксплуатации

Страница: 26 / 60

Page 25
BS180 PROCEDURES
Figure A
Figure B
COUNTERWEIGHTS
• It is not necessary to have counter weights on to use
machine. Use only as needed (See Figure A).
• Use 9/16" blade wrench (supplied). Each counter weight is
attached with two 3/8" bolts. Remove bolts and counter
weights. Weights are heavy, use caution when removing or
mounting.
• Weights: main front weight - 47lbs., add on front weight - 40 lbs.,
each right side weight - 33 lbs., each left side weight - 22lbs.
• Machine total weight with counterweights – 515 lbs.
• Machine weight without counterweights – 318 lbs.
WHEEL CLEANER ADJUSTMENT
• Unplug machine.
• Loosen wheel cleaner with 9/16" wrench (See Figure B).
• Slide cleaner up to face of wheel until it touches but DOES
NOT dig into wheel surface.
• Retighten firmly.
• O v e r t i g h t e n i n g w h e e l c l e a n e r c o u l d c a u s e d a m a g e
to wheel.
WHEEL REMOVAL
• Examine back of wheels (with a flashlight is helpful) to see if
debris is built up.
• Keep clean from yarn build up.
• Unplug machine.
• Lay machine on its side.
• Use provided 3/16" allen wrench.
• Remove Axle Pin (See Figure C).
• Remove wheel securing cap.
• Wheel will slide off. Watch for keyway key.
DO NOT LOSE.
• Remove wheel spacer. This should be
inspected at regular intervals.
CAUTION: Pinch Point.
Figure C
Front
Weights
Side
Weights
Wheel
Cleaner
Wheel
Cleaner
Axle Pin