Blastrac BS-110 II, Руководство по эксплуатации

Страница: 16 / 26

16
6 MAINTENANCE
6.1 Inspection Procedure Hydraulic
Always turn off and unplug electrical source before servicing.
Place equipment and components in a safe and neutral position.
6.2 Wheel Cleaner Adjustment
Keep wheels clean from dirt/debris.
Unplug machine.
Loosen wheel cleaner with the included accessory- wrench.
See figure 6.2 - A
Slide cleaner up to face wheel until it touches but does not
dig into wheel surface.
Retighten firmly.
Over tightening wheel cleaner could cause damage to wheel.
6.3 Adding or Changing Hydraulic Fluid
Occasionally blow out the Filler Port Cap filter to remove debris.
Add fluid only when needed, see fluid level sight window.
See chapter 4.1.1 / 4.1.2 - page 9
Change fluid at least once a year.
See chapter 4.1.2 - page 9