Blastrac BMR-25P, Руководство по эксплуатации

Страница: 10 / 16

10
Controlling the Blasthead
• Pressing the free flow button (button will illuminate) (1) will lower the Blasthead down to the ground.
There is a 5 second delay for the blast head to lower.
• To raise the Blasthead make sure the “ Blasthead Free Flow ” button is not illuminated, then press and hold
the “blasthead up ” button (2) until the castors on the head are off the ground.
• The Clutch On Button (3) will engage the clutch and run up the blast wheel.
• The Clutch Off Button (4) will disengage the clutch turning the blast wheel off.
• The Shot Valve Open Button (5) will engage the linear actuator opening the shot valve on the blast head.
• The Shot Valve Close Button (6) will disengage the linear actuator closing the shot valve.
1
2
4 3
5
6