9
Operating manual BMG-435
9/11
6. Maintenance
Work only with original Blastrac parts.
Check regularly to see if the diamond wings are in good condition. Replace immediately
when these are damaged or worn out.
Prevent premature wear by keeping the machine as dust free as possible, for this reason
clean the machine regularly with a dust collector (vacuum cleaner) especially the upper
drive.
Clean the machine every day with air and non-aggressive materials. Never use a high
pressure water cleaner to clean the machine.
Remove the diamond disc after using the machine
Store the cleaned and dry machine in a dry and humid free room. Protect the electrical
motor from moisture, heat, dust and shocks.
All repair work must to be done by qualified Blastrac personnel, this to guarantee a safe
and reliable machine.
Any guarantee on the machine is automatically void when:
Non original Blastrac parts and or diamond discs have been used
Repair work is not done by qualified Blastrac personnel
Changes, add on’s or conversions are undertaken without the written permission
from Blastrac BV.
