8
Operating manual BMG-435
8/11
5. Operating
During operating the BMG-435, the following additional safety instructions must be
followed closely.
Switch on the machine
Turn on the dust collector before switching on the machine and connect the dust
hose to the machine.
Connect the power supply to the machine (1)
Stand behind the machine.
Push down the handle of the machine (2) so that the machine is off the ground.
Push the green button (3) on the electrical box.
Check the direction of rotation of the 400 volt version. The machine must turn
counter clockwise. (the fan of the motor is turning clockwise if the motor turns
counter clockwise)
If the motor turns the wrong direction, turn the switch in the electrical inlet (1)
and restart the machine.
Let down the machine till the diamond wings hit the floor
Start grinding
Switch off the machine
Push the red button (4) on the electrical box
Wait until the machine stops rotating before laying
down the machine on the handle
Pull out the power supply
Shut down the dust collector.
Operating during grinding
This machine will always have an even grinding result because of the planetary system.
However it is advised to keep the machine constantly in movement for an optimum
grinding result.
