Blastrac BG-250G13-S, Руководство по эксплуатации

Страница: 50 / 62

Operating Instructions BG-250G13-S
Maintenance May 2005
7.9 Additional maintenance
Check the brush seals for wear and replace when they do not provide sufficient
sealing to the work surface. This will prevent dust from escaping and collecting
on internal components.
Apply oil on the adjusting pin of the kick stand operating lever and other moving
parts at regular intervals.
7.10 Spare
Blastrac recommends having the following spare parts on stock to avoid long
down times.
Part No. Description Qty.
000118 Flexible coupling 2
P003860 Count S. Head Screw 20
B20507 Spacer tube 6
CG-1020DB Diamond disc 1
B21014 Complete brush seal 1
7.11 Influences on the grinding pattern
The grinding pattern depends on the surface being treated.
Depending on the required surface profile you will have to vary the tools
(Grinding disc). In order to get the best result compare the individual results of
the tools.
Always check the grinding pattern after new or other types of tools
have been fitted.
© Copyright Blastrac Revision (A) 5-4-05
49