Blastrac 655DC, Руководство по эксплуатации

Страница: 45 / 112

655DC Operating Instructions
Operation
5
Fig.6.3.2
After emptying the dustbin, carry out the actions in opposite
sequence. Ensure that the dustbin is at a correct way repositioned.
If not, there can occur a major leakage in the dust collector system.
Safety precaution: Pay attention to the increased weight of the
dustbin when you release the locking device. Loosen the handle with
caution!
6.4 Switching-off the dust collector
ˆ After finishing the blast cleaning process, the dust collector must
run several minutes to dedust the filter cartridges.
ˆ After several minutes press the push button "Compressor/Fan
OFF".
ˆ Set the main switch of the filter unit to "OFF".
Make sure that all turning dust collector parts have come to
standstill before any inspection or maintenance works are started.
When the
Blastrac dust collector is put out of operation for a longer
period of time, pull out the mains plug and cover the dust collector
with a plastic foil.
Dustbin
positioning
system