Blastrac 655DC, Руководство по эксплуатации

Страница: 15 / 112

655DC Operating Instructions
Safety instructions
5
If
safety-critical changes occur to the dust collector or its working
method, the dust collector must be shut down immediately ! The
cause of the fault must be established immediately!
Changes,
add-ons or conversions to the dust collector which might
impair safety must not be undertaken without the manufacturer's
permission!
This applies in particular to the fitting and adjustment of safety
devices as well as to welding on load-bearing parts.
Spare parts must comply with the technical requirements specified
by the manufacturer. This is always guaranteed if original spare
parts are used.
Intervals for recurring checks and inspections specified in these
Operating Instructions must be complied with!
To perform maintenance work correctly it is imperative to be equipped
with the proper tools for the task in question.
The
location and the operation of fire extinguishers must be made
known on each building site!
Take note of the facilities for reporting and fighting fires!
2.3 Personnel selections and qualification
Fundamental duties:
Work on the
dust collector may only be undertaken by reliable
personnel . Note the statutory minimum age!
Only trained personnel may be deployed.
Specify clearly the
responsibilities of personnel for operation, setting up, servicing and
maintenance work!
Make sure that only authorised personnel operate or work on the
dust collector !
Define responsibilities of the equipment operator also regarding to
traffic safety regulations and empower him to decline instructions
from third parties which are not complying with the safety
requirements!