11
OPERATION
Operators must read and understand fully
this operating manual prior to using the
SnakeBite XQ Nozzle and Silencer.
Operator Competence:
Operators must
be trained and competent to undertake
abrasive blasting prior to using the
SnakeBite XQ Nozzle and Silencer.
Blasting operations generate noise levels
that can permanently damage hearing
:
operators and nearby personnel are to
ensure appropriate personal protective
equipment, including hearing protection is
worn during blasting operations.
Nozzle and Silencer Care:
Take care to
place down the SnakeBite XQ nozzle and
silencer rather than dropping from height
and to avoid impact with hard surfaces as
this may damage the nozzle and silencer.
Operators are required to inspect the nozzle
and silencer for damage or excessive wear
before installing onto the blast hose and
before use.
Nozzle control:
The Blasting Process
generates thrust through the nozzle in
the opposite direction to the blast stream.
Operators must maintain a secure grip of
the nozzle on start-up and during blasting
to ensure the control of the nozzle is
maintained and the operator hand doesn't
slip off the front of the nozzle.
Remote Shut off:
Always use a remote
shut off Deadman system when using the
SnakeBite XQ Nozzle and Silencer.
WARNING