BlastKing NOVO-10, Руководство пользователя

Страница: 9 / 12

9
blastking.com
NOVO-18A / NOVO-218A
Rear Panel Features
1. CH A VOL: This knob is used to increase or decrease
the volume output of input left
2. INPUT LEFT: Plug in audio cable to get signal from
mixer or other devices
3. OUTPUT LEFT:
Plug in audio cable to output signal to
other speaker or devices
4. CH B VOL: This knob is used to increase or decrease
the volume output of input right
5. INPUT RIGHT:
Plug in audio cable to get signal from
mixer or other devices
6. OUTPUT RIGHT: Plug in audio cable to output signal to
other speaker or devices
7. MIX OUT: Plug in audio cable to output signal to other
active speaker box or devices
8. FREQ: This knob is used to choose the frequency from
80Hz to 200Hz
9. MASTER: This knob is used to increase or decrease the
volume output the loudspeaker
10. GND & LIFT: When the switch is put at left direction,
the product does not connect to earth
When the switch is put at right direction, the product con-
nect to earth
11. NORMAL/INVERT:
This is phase reverse switch, put it
at right, phase reverse at 180 degree
12. FULL/HPF: Put this switch at left direction, output full
range signal
Put this switch at right direction, output signal above 120Hz
13. INDICATORS:
PWR : This is power supply indicator, when the product is
turned on, it will be illuminated
SIG : This is signal indicator, when the product is connect with input signal, it will be illuminated
LIMIT: When the volume output is too much, it will be illuminated, please turn down the volume
14. POWER SWITCH: Turns the system on and off. Ensure the system volume control is at minimum when switching on
15. VOLTAGE SELECTOR: Please unscrew the plastic cover to choose the correct voltage you need. Please screw the
plastic cover after you finish choosing the correct voltage
16. AC SOCKET: Plug in power cord to get AC power supply within 100V-240V 50/60Hz