BlastKing NOVO-10, Руководство пользователя

Страница: 6 / 12

6
NOVO-10A
Rear Panel Features
1. CH A VOL: This knob is used to increase or decrease
the volume output of CH-A input
2. MIC/LINE SWITCH: This switch is used to choose the
work mode of Mic in or Line in of CH-A
3. LINE A:
Plug in audio cable to connect to CD player
or other devices when you choose line in mode by mic/
line switch
4. MIC A:
Plug in microphone cable to connect to dynamic
microphone to get signal
5. CH B VOL: This knob is used to increase or decrease
the volume output of CH-B input
6. RCA IN:
Plug in audio cable with RCA connectors to get
sinal from CD player or other devices
7. LINE B: Plug in audio cable to connect to CD player or
other devices
8. LINE OUT:
Output signal to another active speaker box
or amplifier through audio cable with XLR connectors
9. DSP MODE INDICATOR: MUSIC / FLAT / SPEECH /
CLUB
10. LIMIT INDICATOR: Illuminated just before the amplifier
begins to clip and distort. Adjust the level control and signal
level from your source so this illuminates only briefly on
peaks in the music. Using the system with this on all or
much of the time will result in poor sound quality and dam-
age to the speaker and amplifier.
11. BT/TWS Indicator:
BT: When the speaker box is linked to phone by Blue-
tooth, it is illuminated. Bluetooth Name: NOVO-10A
TWS: When the speaker box is working in TWS mode,
it is illuminated
12. BT VOL: This knob is used to increase or decrease the
volume of Bluetooth
13. MASTER: This knob is used to increase or decrease
the volume of the loudspeaker
14. POWER SWITCH: Turns the system on and off. Ensure the system volume control is at minimum when switching on
15. AC SOCKET: Plug in power cord to get AC power supply within 100V-240V 50/60Hz