Author: RRi
- 11 -
Version 1.0
Date: 13. July 2017
EMU-8500-series-operation-instructions.docx
MPEG4 HD IP Encoder User Manual
•
TS Config→PID Bypass:
From the TS Config menu on the upper side of the webpage, clicking “PID Bypass” displays the
interface as Figure-7 where user can add PIDs to be passed, click the “
+
” symbol, input current
IP channel number, then input current IP source PID and output PID which is configurable
according to your needs , then click “set”
Parameters → IP Stream:
This encoder supports TS to output in IP (8 /12 /16 /20 /24 SPTS and/or 1 MPTS) format
through the DATA1 and DATA2 port.
Selecting ‘IP Stream’, will display the interface where to set IP out parameters for the MPTS
and several SPTS. The amount of shown SPTS in this menu depends from the MPTS assigned
ones:
As soon as the Input encoded services have been pushed to the output, the SPTS stream addresses are
defined by default with address and port numbers which can of course modiified to your local needs later.
