5
HCB x00
Part N
o
: 965x.01
Headend Controller
Headend control unit with 8A power supply
B
LINE
8. Alarm function
To activate the alarm function is additional hardware 9651.01 or 9651.02 necessary!
The device is endorsed by an additional alarm function and current limitations, voltage drops and communication disturbaces. The
contact 13 in the communication and supply bus is switched (+5V to 0 V) in case of alarm.
The alarm modules are available in 1 RU and in panel form. It is possible to insert the modules in any order into bus system. The si-
gnal is fed to a SUB-D 9 connector via relais in case of alarm. All the contacts are galvanically isolated. It is possible to trigger several
kinds of alarm.
9. Technical data
Manual operation
Input
3 operating keys,
reset key
Display
LCD, lit
19 x 28 mm
Remote control
Network connection (LAN/ WAN)
Ethernet, 10 Base T
Input connection
RJ 45
Address extent
Without Bus Extender
16 modules
With Bus Extender
240 modules
(15 x 16)
Power supply HCB 200
Main voltage
100 ... 240 V (+10%/ -5%)
Voltage frequency
47 Hz … 63 Hz
Main connector
built in connector
EN 60320-1/ C8
(IEC 320 C8) [3]
Power consumption
max. 110 W
Output DC voltage
12 V
Rippled noise ratio
66 dB
Current drain
max. 8 A
**
Current limit
yes (9 A typical)
Short circuit protection
yes
Overvoltage protection
yes (≤ 14,5 V)
*
Internal device fuse
G 5 x 20, T4A
(IEC 127 - 2/ V)
Protective system
II acc.. DIN VDE 0860 [4]
Protection class
IP 20
Radio noise suppression
according DIN VDE 0871
(curve B) [5]
Temperature range
-10 … +55°C
Power supply HCB 300
Input voltage
48 V DC (36 ... 72 V DC)
Input current (at 48 V)
2.4 A
Power consumption
max. 125 W
Overcurrent protection
fold back
(at 110 ... 143% I
OUT
)
Overvoltage protection
16.8 ... 20 V
Max. current drain
8 A (-10 ... +43 ˚C)
**
6 A (+55 ˚C)
Voltage stability
1500 V DC (input/
output)
Radio noise suppression
EN 55022 (CIS PR22)
Class B [6]
EN 61000-4-2,3,4,6,8 [7] /
ENV 50204 [8]
Environmental conditions
Relative humidity
≤ 80 % (non condensing)
Mounting method
vertical
Mounting location
splash-proof and
drip-proof
Physical information
Dimensions (l x w x h)
without 19“-adapter
50 x 276 x 148 mm
with 19”-adapter
50 x 301 x 148 mm
Weight HCB 200
about 1,500 g
HCB 300
about 1,600 g
Delivery contents
1 x Power cord
1 x Screw driver
2 x Wrenches
4 x Terminal resistance 75 Ω
2 x Multipole sockets
Software options
SNMP activation
CKB 100 (9650.50)
*
to reset device 2 minutes without voltage!
**
> 6 A only use bus cable “8 A“ !
