Blanco FE9085X, Инструкции по использованию, уходу и установке

Страница: 14 / 24

Instructions for Use
(oven)
PILOT LIGHT OF THE THERMOSTAT
It comes on any time the thermostat settles the cooking temperature inside the oven
and it is switched off when the oven reaches the preset temperature.
PILOT LIGHT FOR THE OPERATION
It signals that the appliance is powered and stays on in all working positions.
PILOT LIGHT FOR ELECTRIC PLATES
It signals that at least one of the plate is working
Setting start and end of cooking time
To programme both the starting and ending of the cooking time:
−
touch SELECT until the symbol appears, set the cooking time pressing + or – within
5 seconds;
−
touch SELECT again until the symbol is selected to set the end of the cooking time.
−
put the dishes to be cooked in the oven and select the function and temperature desired
using the function selector and the thermostat.
The start of cooking will be given from the time of the end of cooking minus the duration of
the cooking. 5 seconds after releasing the controls, the current time will reappear and the
symbol
AUTO will remain activated and so will the symbol at the start of the cooking
time.
When the cooking time is completed, the buzzer sounds and the oven switches off
automatically. To deactivate the buzzer, press any of the controls; touch
SELECT to make
the programmer manual again, the symbol MAN stops flashing and the oven can be used
again.
To cancel the programming, zero the cooking time.
Safety lock
This electronic programmer has a function which locks the oven and the programming
set.
The lock does not work with the timer active.
Activation: touch the c for about 5 seconds then the symbol appears.
Notes:
−
if the lock is activated with the display showing the current time and no programming
is set (end of cooking or start and end of cooking), the oven is locked.
−
if it is activated with the oven working or a programming selected (end of cooking time
or start and end of cooking), the lock prevents modifying the programmes.
Deactivation: touch + for about 5 seconds.
NOTE : if there is a power cut, when the power returns the lock will still be active.
14