Blanco CCT905X, Инструкции по использованию, уходу и установке

Страница: 8 / 12

C
= Timer
D
= Timer Button -
E
= Key button
ON/OFF
warning light
F
= Cooking zone selection button
G
= Double cooking zone
ON/OFF
warning light
L
= Double zone selection button
Q
= Cooking zone display
R
= Display Timer
Based on the model owned, the first time the stove top is turned on it may be in the safety position,
with the LED of the ”
Key button warning light
” (
E
) on.
In order to use the stove top it is necessary to press sensor
E
for 3 seconds until the warning light
turns off.
If the appliance is not used for at least a minute, the key function activates automatically.
- The appliance may be turned on by selecting start-up sensor
A
. A zero appears on all displays for
10 seconds. If no operation is carried out within the next 10 seconds the stove top turns off.
- It is possible to turn a stove top element on by selecting the “
F+
” or “
F-
” sensors within 10 seconds.
If the “
F+
” sensor is used, the display shows selection 1, if the “
F-
” sensor is used, the display shows
selection
9
.
- Once this operation has been completed it is possible to choose temperature adjustments using
the “+” or “-” buttons.
- The stove top element may be turned off by selecting “0” with the
F
sensor, after 3 seconds the
cooking area turns off.
It is also possible to turn a stove top element off by selecting the “
F+
” and “
F-
” sensors at the same time.
- The stove top may be turned off by selecting the main start-up sensor
A
. If all stove top elements
are on “0”, the stove top turns off after 10 seconds.
- If the stove top is equipped with elements with an extension, the second zone will start-up after
it verifies that:
- the LED of the
B
key button is turned off, otherwise it will disengage it.
- Press button
A
to turn the stove top on.
- Select the desired element and adjust the power using the “
F+
” or “
F-
” buttons.
- Once the power is adjusted select the
L
button to activate the double zone. Press the
L
button a
second time to deactivate the double zone.
- If an object is placed above the controls, the stove top will automatically change to the
OFF
posi-
tion.
When an element is brought to the
OFF
position and the glass surface temperature is above 50°,
the cooking area involved will show an illuminated “
H
“ on its display.
- the
B
function blocks stove top functioning at the moment of selection. Ex: if the function is acti-
vated while the stove top already has two zones turned on, the program is blocked, even if trying
to turn on another zone. The same thing happens if the appliance is turned off and the function is
activated, the stove top does not turn on.
In order to activate or deactivate it keep a finger above sensor
B
for about two seconds. The function
is active when the
E
warning light is turned on.
Even with the key button is active, the
A
button works the same.
Heat up (Rapid heating)
The
Heat up
function can be used to set the cooking zone to its maximum temperature for a speci-
fied period of time, after which the temperature will return to a lower value selected previously.
To activate the
Heat up
function, select the hotplate by pressing the + button until setting 9 is dis-
played; if the button is pressed again a decimal point “
•
” or the letter “
A
” will appear on the display
(next to the digit 9) for 5 seconds. This means the
Heat up
function is active.
The desired power level (between 1 and 8) should be selected within 5 seconds. If power level 9 is
selected, the function is disabled. To deactivate the
Heat up
function, simply select the + button
- 8 -