Blanco BSID4610X, Инструкция по эксплуатации

Страница: 17 / 40

16
DELAYING THE PROGRAM
The PROGRAM DELAY button (6) can be pressed to delay the start of
the washing program by up to 24 hours. This means that the dishwasher
can be operated at the time of day of your choice.
Press the PROGRAM DELAY button (6) again; the 3-FIGURE DISPLAY (12)
(Section 3.1) will show the number of hours of delay with which the appliance
will start.
After setting the delay, start the program: press the START/PAUSE
button (4) for a few seconds, until the PROGRAM STARTED light (5)
starts flashing.
The appliance will prewash the dishes, after which the “program delay”
set previously will come into effect.
To cancel the program delay once the wash has started, proceed as
follows:
•
Press the START/PAUSE button (4) for a few seconds, until the
PROGRAM STARTED light (5) stops flashing;
•
Press the PROGRAM DELAY button (6) several times until the
program delay returns to zero;
•
Press the START/PAUSE button (4) to start the program.
START THE DISHWASHER
After carrying out all the operations described above correctly, to start
the dishwasher simply press the START/PAUSE button (4) for a few
seconds until a beep sounds (the PROGRAM STARTED light (5) starts
to flash). The 3-FIGURE DISPLAY (12) will show the duration of the
program in minutes. The duration time is only approximate, because it
depends on the washing conditions (quantity of dishes, water
temperature, etc.), and is also continually updated as the washing
program progress.
The 3-FIGURE DISPLAY (12) (Section 3.1) shows the estimated
duration of the washing program.