11
Installation
Step 4. Dishwasher installation steps
Please refer to the specified installation steps in the installation drawings.
r to the specified
installation steps in the installation
1. Affix the condensation strip under the work surface of cabinet. Please ensure the condensation
strip is flush with edge of work surface.
2. Connect the inlet hose to the cold water supply.
3. Connect the drain hose.
4. Connect the power cord.
5. Place the dishwasher into position.
6. Level the dishwasher. The rear feet can be adjusted from the front of the dishwasher by turning
the Philips screw in the middle of the base of dishwasher use a Philips screw. To adjust the
front feet, use a flat screw driver and turn the front feet until the dishwasher is level.
7. Install the furniture door to the outer door of the dishwasher.
8. Adjust the tension of the door springs by using an Allen key turning in a clockwise motion to
tighten the left and right door springs. Failure to do this could cause damage to your
dishwasher.
9. The dishwasher must be secured in place. There are two ways to do this:
A. Normal work surface: Put the installation hook into the slot of the side plane and secure it to
the work surface with the wood screws.
B. Marble or granite work top: Fix the side with Screw.
Note