Blanco BOSE6APX, Руководство по установке, Страница: 17 / 41

16
EN 4 USING OF YOUR
• USING THE PROGRAMMER
• Setting the time.
- When the power is on
The display flashes 12:00. (fig.1)
Set the time by pressing the + or - buttons
(continued pressure on the button runs
through the numbers quickly) (fig.2).
Example: 12:30
The adjusted time is automatically recorded
after a few seconds.
The display stops flashing.
•How to change the time.
- To set the clock to the correct time.
The function selector must be in position 0
(fig. 1).
Press buttons
“ ” and at the same
time for a few seconds (fig.2), then release
them when the time of day begins to flash.
The sound of beeping shows that you can
set it now.
Adjust the time setting using the + or -
buttons (fig.3).
The adjusted time is automatically recorded
after a few seconds.
fig.1
fig.2
fig.1
fig.2
fig.3
Important
If you do not confirm the selected time , it will be registered automatically after a few
seconds have elapsed.