7
Once the oven is installed it is important to
remove the protective materials which were
put on in the factory.
Remove the plastic film from these parts,
then wipe with a cloth dipped in methylated
spirit.
Important: The oven will work only if the
time of day has been set.
Switch the oven control to
and the
thermostat control to MAX, then leave it to
run empty for 30 minutes to burn off any other
protective materials.
This will also remove any unpleasant smells.
When the appliance is first
installed
Cooling fan
The cooling fan is designed to cool the walls
of the oven and the components of the oven
itself.
The fan switches on automatically after a
few minutes of cooking.
Warm air is blown out through the aperture
near the oven door handle.
When the oven is switched off, the fan will
remain on in order to cool the oven and
kitchen cabinets properly, after which it
switches off automatically.
NOTE
: The fan may run up to 45 minutes
after cooking has been completed. Leaving
the door ajar will lessen the cooling time.