Blanco BIC64B, Инструкция по эксплуатации

Страница: 16 / 20

INSTALLATION OF BUILT IN COOKTOP
In order to prevent leakage of any liquids on the work bench and fix the appliance to the bench, a special
sealing tape is supplied together with your oven. Place the cooktop glass down on a clean cloth on a stable
flat surface & apply this seal around the bottom edge of the cooktop (see below). Remove the backing from
the sealing tape and then place the appliance in position. If the sealing tape is not enough to fully seal the
appliance to the bench, use a small bead of clear high temperature resistant silicone sealant.
This appliance can be installed into a workbench 30-40mm thick. When cutting the hole in the work bench,
keep in mind the correct space and ventilation which are shown in the diagrams below.
A board must be placed a minimum of 20mm
below the cooktop that prevents anyone from
touching the underside of the cooktop. Take
care that there is adequate ventilation for air
exchange to the inductive elements (at least
20mm).
NOTE: INDUCTIVE COOKTOPS GENERATE A
LOT OF HEAT INTERNALLY WHEN IN
OPERATION. THE BOTTOM OF THE
APPLIANCE MUST HAVE A CLEAR PATHWAY
TO VENT THIS HEAT OUT VIA THE BOTTOM
FANS TO THE OPEN AIR IN ORDER TO KEEP
ITSELF COOL. FAILING TO PROVIDE
ADIQUATE VENTILLATION WILL DAMAGE
THE APPLIANCE AND VOID YOUR
WARRANTY. THE ABOVE DIMENSIONS
SHOULD BE CONSIDERED THE MINIMUM
VENTILLATION REQUIRED.
12