Auto Cooking Function
The Auto Cooking Function allows you to set any or all cooking zones up so that they run at a high power
level for a period of time, and then drop the power down to a lower level.
1. The appliance must be in set to
Operating-Mode
.
2. Press any cooking zone
Power Slide Touch Control
(04) until the correct power level is displayed and
then hold for 3 seconds. The
Cooking Zone Power LED Display
(12) will start to alternate between the
setting and “A”, and the cooking zone will start to cook at power level 9 for the specified time (see table).
3. After the time has elapsed, the power will drop down to the set level.
4.
To disable the Auto Cooking Function, press the
Power Slide Touch Control
of the cooking zone and set
a new power level.
Vertical Bridge Zones Function
The Vertical Bridge Zones Function allows you to control the front and rear cooking zones from a single touch
control (making it easier to cook something in a long pan, like fish, that covers both cooking zones). When in
operation, the cooking zone control of the rear cooking zone (1
st
and 3
rd
cooking zone controls from the left)
controls both cooking zones, while cooking zone control of the front cooking zone is disabled (2
nd
and 4
th
from
the left). Pressing a sensor on the rear control will activate the displays of both cooking zones, except that the
front cooking zone
Cooking Zone Power LED Display
(12) will stay blank.
1. The appliance must be set to
Operating-Mode
.
2. Press
the
Melting, Keep Warm & Boil Control Function Touch Control
(03) of the two cooking zones to be
linked (left pair or right pair) simultaneously until the
Vertical Bridge Zones Function
Indicator
(13) lights
up on each of the cooking zone control panels (the front
Cooking Zone Power LED Display
(12) will be
disabled.
This function will work with the Timer and Auto Cook Functions, but not with the Boost or Super Boost
Functions.
3. To disable the function, press the pair of
Melting, Keep Warm & Boil Control Function Touch Controls
simultaneously again. The
Vertical Bridge Zones Function
Indicators
will turn off and the power level of
both cooking zones will revert to 0.
Note: For efficient cooking, both cooking zones must be covered by suitable cookware (small pots can be
used between the 2 cooking zones, but this function is best used with long trays or larger pots).
Melting, Keep Warm and Boil Control Functions
The Melting, Keep Warm and Boil Control Functions can be used to keep food at a certain temperature for
long periods of time (up to 2 hours). The cookware can be removed from the element for up to 10 minutes
without disabling the function.
1. The appliance must be in set to
Operating-Mode
.
2. Press
the
Melting, Keep Warm & Boil Control Function Touch Control
(03) of the cooking zone once to
activate the Melting Function (temperature set at 42
⁰
C), indicated by the lower
Melting, Keep Warm &
Boil Control Function Setting Icon
(07).
3. Press again to activate the Keep Warm Function (temperature set at 70
⁰
C), indicated by the middle
Melting, Keep Warm & Boil Control Function Setting Icon.
4. Press the touch control a third time to activate the Boil Control Function (temperature set at 94
⁰
C),
indicated by the highest
Melting, Keep Warm & Boil Control Function Setting Icon
.
5. Pressing again will cycle the function back to the first setting.
6. The function can be disabled by adjusting the cooking zone power level.
Stop N Go Function
The Stop N Go Function allows you to stop all activity on the appliance (cooking, timers) and restart for where
you left off at a later time.
1. While the appliance is in
Operating-Mode
, press the
Stop N Go/Recall Function
Touch Control
(02). A
pause symbol “ll” will appear in each
Cooking Zone Power LED Display
(12) and the indicator above the
sensor will light up. All functions will pause, and all touch sensors disabled (except for
On/Off
Power
touch control
).
2. Once ready to restart, press the
Stop N Go/Recall Function
Touch Control
(02) again. The indicator
above the sensor will flash for 2 seconds and the
Power Slide Touch Control
(04) of the right hand
cooking zone control panel will start to flash. Press that
Power Slide Touch Control
(04) within the 2
seconds and the pause symbols will disappear. The appliance will then continue to work as it was before.
6
Содержание BIC64B
Страница 1: ...Instruction Manual for Induction Cooktops BIC64B...
Страница 18: ...We appreciate your feedback Please review our products on www blanco australia com 14...
Страница 19: ...15...
Страница 20: ...16...
