13
7/ LOADING THE RINSING PRODUCT
EN
12
6/ LOADING THE REGENERATING SALT
EN
Adjustment lever
Fig. 07
1
2
3
1
2
3
A
A
B
B
C
C
EAU
SEL
A
A
B
B
C
C
Fig. 06
•
Loading the regenerating salt
(Fig. 06)
Important :
Only use special dishwasher regener-
ating salt. Do not use table salt or any type
of cooking salt: this could damage your
appliance’s water softener.
Unscrew and remove the stopper on the
salt tank.
Fill the tank with rre
eg
ge
en
ne
erra
attiin
ng
g s
sa
alltt spe-
cially designed for dishwashers.
Use the funnel supplied with your dis-
hwasher. The first time, top up with water up
to the rim of the tank.
•
Regenerating salt indicator :
This illuminates when salt must be added.
After the tank has been filled with regenerat-
ing salt, the indicator light may remain lit until
the salt has dissolved sufficiently, usually after
one cycle (of if the tank has not been filled
completely; for example, when first putting the
machine into service using the sample).
Important :
If the salt overflows when filling the
tank, to avoid oxidization of the tub it is
advisable to remove the salt crystals or to
run a Soaking programme.
C
C
B
B
A
A
• The rinsing product (Fig. 07)
Important:
Use a special dishwasher rinsing product;
this will give you dry, sparkling crockery.
Before switching on the appliance, fill
the rinsing product container until the level is
flush with the top of the setting lever.
Adjust, if necessary; the original setting is 2. If
you experience poor drying or residual marks
after a few cycles, increase the setting by turning
the lever (fig 07
: marking 3 to increase it)
• Checking the level of rinsing liquid
:
This lights when rinsing liquid must be added.
Important:
If any rinsing liquid overflows onto the
door when filling the container, sponge away
the excess to avoid foam forming.
C
C
B
B
A
A
